Aquafog 3000 Dry Ice machine


Aquafog 3000 Dry Ice machine


• Award winning lightweight, portable, dry ice fog machine
• Holds 28 gallons of water and 75 lbs of dry ice
• 120v electrical system with circuit breakers
• Indicator lights for water temperature and heating element status
• Low-water cutout protection
• Adjustable sensing circuit to maintain temperature over extended use periods
• Non-corroding thermoplastic tank features an extra large access lid for easy loading with integral casters for transport

A new concept in dry ice fog, this water-based system is light-weight, portable, and durable, allowing you to create large amounts of billowing, low-lying fog. The AQUAFOG 3300™ features a durable, light weight, molded thermoplastic tank for corrosion resistance. No more rusting steel drums to replace. The large lid lifts for easy loading of the stainless steel ice shelf. All electrical components are conveniently located behind the electrical panel. A powerful stainless steel pump brings heated water from the tank up to the dry ice. A 6" fan pressurizes the tank and sends the fog out to the stage.

The heart of the AQUAFOG 3300™ is the custom designed and molded plastic tank. Plastic is both light weight and corrosion resistant, and many of the plumbing and electrical fittings use pressure seals to ensure extended leak-proof use. The large lid makes it easy to load dry ice into the machine.

The AQUAFOG 3300™ conveniently plugs into standard 15A or 20A Edison wall outlets; no need for 220 volts. Circuit breakers control the dual 1650 watt heating elements, fan and pump. Indicator lights show the status of the water temperature and heating elements at a glance. A low water level cutout switch assures that the heaters will not operate if the water is low. The sophisticated adjustable water temperature circuit will bring the temperature to a range of 100 to 160 degrees (F) and will maintain temperature all through long rehearsals and show runs. The convenient 4-plug system allows for easy remote control.

The large 8" rear wheels and 3 1/2" front swivel casters make moving the AQUAFOG 3300™ a breeze.

Material: High temperature plastic polymer
Dimensions: 21 1/2” x 31” x 38” (including casters)
(546mm x 787mm x 965mm)
Water capacity: 28 gallons (106 litres)
Ice capacity: 75 lbs (34 kg)
Casters: 3 1/2” (88.9mm) swivel front,
8” (203mm) fixed rear
Hose vent: 4” (101.6mm) molded into tank
Fill Door: 20” x 30” (508mm x 762mm)
Weight empty: 115 lbs (52kg)
Shipping weight: 130 lbs (59kg)
Weight fully loaded: 455 lbs (208.19kg)
Pump: Stainless steel 10 gallons per minute (37.85 litres per minute)
Fittings: All stainless, brass, or high temperature plastic
Voltage: 120v, 230v available
Heating elements: 120v 1650 watt; 230v 3000 watt (two) screw in
Thermostat: Adjustable automatic control (100°F-160°F) (38°C-71°C)
Overtemperature: 175°F (79°C) cutout, manual reset
Low water cutout: Turns off heaters when water is low
Blower: 240 CFM axial (6.799 CMM)
Circuit breaker-Type: 20 amp on heating element 2 amp (lighted) on fan & pump
0x0 x0 in
* 1